Testimonials

I used it for the first time today will cook them tomorrow.  So far 100% satisfied.

I recently purchased Cactus Juice stabilizing resin. The order arrived in a very short time and was in excellent condition. 

Dear Curtis,

since I have used the Cactus Juice for my pieces of wood stabilization, I thank God for the work you and your family have done.

Your products have taken my projects to a higher level! Have enjoyed working with the Cactus Juice, and the Alumilite products also. I make custom knives, duck calls and also pens. I have incorporated your products into all three!

Thanks again!

great Company, great people, great product

My first few runs at stabilizing has been a great success. Cactus Juice works so easy it is almost fool proof. I should know HA HA HA HA.

I placed my first order with Turn Tex recently.  It was processed, sent and received quickly.  Everything people say about the customer service is true. 

There was just one issue I wish I had known about in advance.  I purchased a small bottle of black Alluminite dye.  It was dry and you had to really squeeze the bottle to get dye out.  I used a scribe to try to open the top more than what it was, but I still had to squeeze so hard that the top of the bottle came off and the entire contents of the bottle was forced into the small amount of resin that I wanted to dye.  I will have to order another bottle.  If I had known this, I would have forced the top off the bottle and scooped the dye out with a small stick.

Otherwise, a great website with good products and service.

My Comments:  I am sorry you had trouble the the dye.  Please note that it is stated in bold red on a yellow background on the dye page of my site that you must cut the tip of the dye bottle before use.  The dye was not dried out.  Alumilite dye does not dry out.  The black dye is very thick, though.

I have only placed two orders as I am a new customer and a stabilizing rookie. I am very pleased with both orders . . received promptly and items were packaged very well. I am happy with my stabilizing results using Cactus Juice and a vacuum chamber I purchased from you. I have used three gallons in Feb. and opened my forth gallon today. (should have bought 4 at a time for better savings) :-) Any how Curtis, the person covering while you were gone did a great job. I will be a long term customer !! Hope you enjoyed your time off..... Jim Mercer

Lightning fast shipping, great products. BTW: I decided to "save" money by buying my own fittings and valves systems at hardware store, and it would have been actually even a little cheaper than if I had just ordered it already assembled by TurnTex!

I have used your product before and was very satisfied with the results.  Your service is outstanding even for those of us that are challenged.

Thank You,

Overall experience was great. Thanks

Quick delivery and great customer service. This is my 2nd order and I am happy with  how Cactus Juice gives me another option for salvaging nice wood, that was unusable. It's also nice to be able to add color to the resin and create interesting pieces, out of some really bland wood.

It does take a little practice to get the results you want, but it's worth the effort. If you have any questions or problems, Curtis is more than willing to help, all you have to do is ask.

Thanks Curtis for the parts to build my tank. I added a regular cap to the bottom and smoothed the top. With your cap end and a little stand I made, I am back to stabilizing. I hate I spent so much time and money trying to do this home made. Again thanks

EXCELLENT service. My orders were delivered  faster than  I expected.  Love it. The products I purchased were outstanding.  I wasn't  sure that I was going to do it correctly but the tutorials and video help me have a successful  outcome. Thank you for such a great experience. 

I've done business with TurnTex for a little over a year now and I have been 100% satisfied with every purchase. Curtis has a lot of info on his website and has always taken the time to answer any of my questions! Top notch business and I look forward to continued business! Made in the USA! 

Turntex has shown great customer service.  I was amazed at how fast my package was out your door, and arrived at my door.  I will be back, and have already recommended you to many people.  Keep up the great work, and thank you.

I found your web site organized and easy to navigate, when I placed my orders I received confirmation quickly. The one order for coloring dye came within a few days after I submitted the order. The second order I placed was for resin and a pressure chamber and that took longer. I did reply back to one of the emails I was sent and ask about the status but never received anything back, if the info email address is a do not reply to address then it should be noted on the email. It might be helpful if there was an email address that we could use when we have questions. Other than that I’m sure you will continue to receive my business, I posted some pictures of what I received on a Knife forum I belong to and had a few questions about where I ordered it form, I passed the site information back to the members.

I contacted TurnTex before my initial order. Asked a few questions. Curtis was very responsive and extremely helpful. 

The product works amazingly well! I can't wait for new projects.

I purchased the oven tamer and it works excellent. Any product I have  ordered has arrived well packaged and in very good time.

This is a great company and provides great product in a speedy amount of time. THANKS!

Curtis is a great person to do business with!  I couldn't be happier with my oven control unit.  Already using it.  In fact, my wife is eyeing it to use to bake her poly clay at a consistent temperature.  I've never been disappointed with any purchase, and his service is outstanding.  You Can't do better than purchasing from Curtis. Besides the outstanding products, Curtis is very active with the stabilizing Facebook group and provides in-depth advice & guidance.  I'm one happy customer

I haven't had a chance to use the items I purchased yet. Fast shipping was very nice though. 

Cactus juice fills a critical need. I make Kaleidoscopes from found wood, usually green (wet), sometimes punky to crappy. I have been using another brand that took forever to soak in with no way to speed it up. Cactus juice speeds the process up so much that my profit margin is increased and the worry factor is reduced. The next steps are dying the punky stuff and using the casting resin.

hi Curtis, this time it was double time fore delivery, but that's ok, came to my postoffice today after 3 weeks 

I recently ordered an 8x18" vacuum chamber and have been pleased with the quality of the build and finish, thank you 

I really happy with the cactus juice and chamber. I've been using it for two days now and the cactus juice is giving results. I've used it to stabilize 5-10 year old wood. Cactus juice is definitely the best stabilizing resin for it's price. I am 100% happy with the resin. 

TurnTex has always given me great service and my recent order 4 gals of Cactus Juice was no exception. Fast shipping and great product.

Lin Bayford
Cobble Hill Pens

Curtis Answers questions very quickly and is EXTREMELY knowledgeable with the products that he provides. He has guided me in the right way to use cactus juice and even how to fix my own screw ups. Every bit of information I've read on this website is top notch and with support like that, you can't go wrong. 

                                                                                                                                                                         -St. John's Medieval Shoppe. 

I am new to stabilizing wood and greatly appreciate all of the great free info. I've run about five batches so far and everything is going well. I'm in no hurry so I can allow plenty of time for drying the wood, letting it soak and letting it cure. So far I've just used native woods; walnut, oak, wild plum, osage orange and hickory. It appears that the stabilization has an added benefit in that the wood does not seem to load a grinding belt as bad as unstabilized wood.

Thanks again for the info and great service.

What a great company to do business with. Curtis not only treats you like you are his only customer, but also like you are best friends. I will continue to support his business.

Thanks Curtis,

Easy to use and does exactly what it claims to do.

Turn-Tex has the best pricing and customer service I've found yet. Good communication, fast shipping, and plenty of offers to help with any questions or problems make it great to do business with them. I'm not a high volume user of their product but because of my few experiences with them I'll definatley do more business in the near future. Thanks a lot.

Michael D. Smith Sr.

Spoke with Curtis on the phone and he was very helpful.  Was very easy to speak with and genuinely wanted to help.  Shipping was very fast.  Will be ordering all my casting and stabilizing supplies from him now.  Would highly recommend dealing with him.

Ben Jenner
Poundin Down Waterfowl Supply

TurnTex is a great company to work with.  I had a question about the OvenTamer I purchased at 6 pm and was answered within 10 minutes!  Curtis is a very nice guy and willing to answer any questions!  I'll be a customer as long as I am still stabilizing blanks!  

TurnTex is awesome, from customer service to answering questions Curtis is great. The only place I go for for his product.

Fast shipping and excellent communication. My new number one source for stabilizing and casting supplies.

Curtis has been providing outstanding customer service since I started buying his products 4+ years ago. From noticing a change to the shipping charges and issuing me a credit for the difference, on my first order, to spending more than an hour helping me troubleshoot issues with an unusual (to me) application of Cactus Juice on my most recent order, and on every order in between, the customer service that Curtis and team strive for (and deliver!) is the highest standard across all the retailers I've purchased from.

Got my order fast as usual. You guys do a great job! When I opened my order, I found 1 of my dye bottles Had leaked a small amount. No big deal. Thankful they had lots of paper packing around everything to soak it up. Upon Inspection, I found the foil seal under the cap had failed. I seriously doubt they had anything to do with it. Just one of Those things that happen.

My Comments:  Scott, I am sorry the leak happened.  As you guessed, we do not package the Alumilite dyes but we do try to check each bottle.  I have created and sent you a Merchandise Certificate to use on your next order to compensate you for the leaking bottle!

Curtis, In regards to my recent order, I am very happy. Great communication and fast shipping. Best product on the market for the home stabilizer. Thanks

very satisfied with cactus juice ordered super fast shipping very impressed.  I will order this product again in the near future.

I've placed a few orders with TurnTex and plan on placing several more. Customer service is awesome, extremely fast shipping and excellent prices. Curtis is a pleasure to work with. I'm happy to be able to support small business and made in the USA shops! 

I recently placed my first order on TurnTex and to say the least, I am very satisfied with the quality of product and customer service provided. This will defiantly be my first of many purchases, for I do not see myself shopping anywhere else for stabilizing materials. Thanks again.

Excellent on all fronts, communication has been brilliant, the juice pot (vacuum chamber) is very well made and obviously made with great care and meticulous detail. 

Didn't get stung by customs to badly either! Bonus.

Thanks Curtis. 

Ian - Bristol England. 

Great service and great products. Cactus juice is the gold standard of stabilizing solutions. But I do have a question,, What is double dying? I dye wood and I want to know how to double dye... thanks,,,,,,,,,,, Corbin

The service and response from Curtis was great. His product is top notch,I will be ordering more. Alex.

This was my first order.  The stabilizing lid was well constructed and works as designed.  All positive for my first order.  If I would suggest to have a wider one built with a clear lid so I can use my pressure pot for larger items.  Other than that I have nothing negative.

Great small company to do business. Very fast shipping and customer service that is what every business should strive have. Will do a lot more bushiness in the future. 

The new OvenTamer controllers are well worth the money. When set to 200 degrees, my cheapy toaster oven would range from 180 to 260 degrees. This wasn't ideal for cactus juice, pre-heating molds, or final cure of Alumilite. I've only used the tamer a few times, but after the auto-tune, the temps climb to the setting and are stable within a couple of degrees, and often within a few tenths of degrees. This reduced the bleed-out of cactus juice so more would cure in the wood rather than pool on my catch tray. I can pre-heat Alumilite molds, and when the pressure pot is done, I pop the molds into the oven at ~140 degrees for a while to ensure that the cure is complete. This is necessary for me to ensure a complete cure for tube-in castings.

Curtis was very helpful when I described my issues before I purchased the tamer, and I have always been very happy doing business with Turntex.

I have ordered twice from Turntex, both times my orders were exact and arrived fast. The service doesn't stop there, the help center is full of helpful information. I will continue to buy from them.

I only purchased the Cactus Juice and some dyes. The products were delivered quickly, which I always appreciate. I have only tried the clear Cactus Juice on a single test run. Everything worked exactly as expected - probably because I read and followed the clearly written instructions. I will definitely be coming back to buy more, every time needed.