Testimonials

Have ordered a couple of times. Nothing but good to say about these folks

I really love the Alumilite product and I greatly appreciate the service and support from TexTurn! I use Alumilite to cast two dozen Oak burls from a very old tree in the mountains of Western New Mexico. The tree has mistletoe burls growing on most of the limbs. The grain in the burls is multi colored and very dense but few of the burls are large enough to make a bowl or vase. I remove the bark and empty the holes in the burl, then I case the burl with Alumilite. I add blue, red, or green to the Alumilite with a little pearl-ex for sparkle. I make my casting forms using a base of 3/4" plywood and then form a circle using aluminum sheeting which is hot glued into a groove turned into the plywood base. I cover the plywood base and the aluminum sheet with clear plastic packing tape so the Alumilite does not stick to the mold. The mold is made to fit the burl as close as possible to reduce the amount of Alumilite that is wasted in turning. I cast under pressure for 24 hours at 50PSI (just to be sure). After casting I hollow out the inside of the form to make a vase with walls of 1/16” to 1/8”. Next I bore a 1/2” hole in the bottom and insert a polycarbonate plug that is domed and polished. Setting the hollow form on a rotating laser turn table shoots a light through the polycarbonate plug, thus revealing the Alumilite that is captured between the remaining pieces of burl. The only caution is that the wood MUST be dry down to 7% or lower. The Alumilite burls have been a very popular sales item.

I have purchases several times from TurnTex and have never been disappointed.  The product arrives shortly after I place the order, well packaged and never a leak.  

Hello,

I have been dealing with TurnTex for about three years now. I find Curtis, as well as his employees, to be very receptive to my needs. They go out of their way to make certain I am 100% happy with my orders. They know there products very well and have made me feel very comfortable when I call for information. I have also emailed for help and was surprised when Curtis called me back and spent more than enough time with me making certain all my questions were answered in full.

All of the products, which are many, that I have purchased from TurnTex are superior to others and their prices are very competitive to others. 

I highly recomend TurnTex, they are a great company that supplies American made products.

John Hartman
Durango, Colorado

TurnTex is the best source for all your stabilizing and casting needs, and they go out of their way to make sure you receive the best service.  The Cactus Juice is second to none and if you follow the directions in using the product properly you will succeed in the use and life of the product. Great selection and information to help you with your projects.

I have purchased Cactus juice several times from Turntex and each time the service as exceptional. I say exceptional as I received my order in 5 days which in this day and time is extraordinary.

I always get great results from cactus juice, but the new formal is even better! I love that it doesn’t foam up....and as always arrives quickly and safely 

Great product for stabilizing. It’s the only thing I use. Great customer service! 

I have been a customer for years.  Your attention to detail and speed to ship are truly above average.  Your product is top notch.  I love the improved formula.   Till next time, thanks Curtis. 

I’m new to stabilizing so the fact that Turn Tex made it easy to understand, order and get going gave me a huge amount of confidence in myself and the products. 

Everything came in perfectly I had great results with the product and very happy with my order. I've become a major fan of this company, and their great customer service and products. Definitely a loyal customer for life.

Always great products. Very fast delivery. Excellent shipping status updates and follow up on service. Recommend this company to anyone.

We have used a couple brands,and always return to cats juice. 

The last time I commented on Turn Tex  several months ago, I was very satisfied with both the product and personal care by the staff. Curtis was willing to take the time to share what he knew to help me be successful. Since that time I think I have bought more product than before. I am even more satisfied than before. The product and service has been excellent. Consistent quality and service is hard to find. But here it is. Its 5 star.   JLC 

Turntex-Curtis and his employees always provide the absolute best service.  The Cactus Juice is a great product and of course the 80# Alumilite is great for us high volume casters. I had a gauge go bad on my Turntex Chamber after several years of heavy use. He replaced it very quickly. I had a JB Pump(not from him) but I asked if he had a replacement vane for it, he did and sent them to me immediately. That is service. 

I have been using Cactus Juice and dyes for stabilizing my knife scales for a couple of years now and have always had good results.  I have tried other products and found that Cactus Juice wins.....every time!  And....the customer service is awesome!  I recently seized up my brand new J&B vacuum pump (totally my fault)  and Curtiss Seebeck took the time, while on a camping trip with his family, to call me and walk me thru the process of repairing my pump....on Easter weekend!

I have been using it for a couple of months now and loving it.  I got the pump saver and the Twist Lock Stability Ring.  it was well worth spending a little more to have them.  Anytime someone asks me about stabilizing I will always tell them to get this brand and not waste there money on some other brand.  

Hi Curtis, Fantastic everything. Your shipping times and organization seem to just be getting better and better! My only teeny tiny feedback would be that quite often (25% of the time) the little shiny inner liner for the cap of the small bottle of cactus juice activator is loose or leaking or not completely sealed. Otherwise, great job. Thank you for helping us to make a living! Thanks, Susan North WOods, LLC and VIVID

Ordered resin aagin. On time and the packaging is great. I have actually had problems with other Alumilite distributers packaging methods. I have a mess a couple of times. I have had no issues with Turn Tex. Thanks.

TurnTex and Cactus Juice enable me to use found wood to produce unique game call blanks.  Shipping is fast and the service is very customer oriented.  Give them a try!  You'll wish you had done it sooner.

As usual, order one day, delivered the next... Of course we are both in Texas, but still that kind of service is amaazing.

Thanks for your continued superior service.

Bill Kimbrough 

Every time I order from the folks at TurnTex, I'm pleased with the product AND the people! It's like doing business with family!

Fast service  got four gallons new cactus juice . Been doing clear stabilizing with it much  better on foaming.  Seems to be less bleed out. Will turn a call with it tomorrow.

I recently upgraded to a larger TurnTex stabilizing tank, Pump Saver, Cactus Juice and, based upon Curits's recommendation, a JB Eliminator vacuum pump,  I am not only very pleased with the quality of the products I received but, also in the outstanding customer service.  There was some confusion in my order so, Gaige called to confirm I really wanted two of an item when I only meant one.  Saved me some money and duplication and, the hassle of returning it.

Great job Gaige

Plus, the TurnTex, LLC Customer Connection on Facebook has been very helpful and a time saver.

I accidentally chose the wrong kind of Alumilite when I ordered online, but realized what I’d done right after I’d confirmed everything. I slightly emailed, explains my error, then called the next morning. Turntex totally understood, and were more than happy to correct my order. It was sitting at my doorstep three days later. Awesome customer service! AA++

I've been buying Cactus Juice from Curtis for quite a while now. Great product. Fast shipping. What more can you ask for?

I am a first time buyer from Turntex and brand new to stabilization and hybrid pen blank construction. The information on your web site on Cactus Juice and Alumalite was very valuable to me. My order was on my doorstep in 3 days. Heard about you on YouTube where you we highly recommended. I’ll be back with another order soon.

Absolutley the best everything!!!!  well Done Turn Tex!!!

  So I held off on this review until I completed a few batches to get an average. I numbered weighed in grams each piece of wood. Then I dried my wood in a toaster oven at 230 degrees for 24hrs, removed and re-weighed, placed them back in the toaster oven for four hours. Removed and re-weighed. Satisfied that the two last measurements were the same I went to the Vacuum chamber. I did Turkish Walnut, Cedar and Rosewood as a test sample. I have a 5 gal Bacoeng with 4.5 cfm pump. Easily pulled max vacuum and ran it until the air bubbles stopped. Next was the soaking phase then back to the toaster to cure. I will say that I wrapped the first batch too early and that made it harder to get the aluminum off. After removing the aluminum and sanding the remaking cactus juice off there was a significant weight gain. Overall I found the stabilizing process simple but timely. I have tried the colored liquid cactus die as well, still experimenting. The final verdict will be when my Brother turns these blanks into knife handles. 

The customer service is always quick and accurate when it comes to answering questions. They’ve always been timely with processing/shipping orders, which I genuinely appreciate. I’ll always buy my stabilizing supplies from Curtis and his business. 

Awesome product, I had no problems setting up or using. 

I placed my order with Turntex. I knew I would have to wait 7 to 10 days for the vacuum chamber to be made. It was made and shipped in a timely fashion and arrived with all the extras I had ordered except one. I emailed Curtis and he responded back to me the same day about the missing item. It was shipped and arrived in a timely fashion much to my satisfaction. I would recommend Turntex to anyone who is looking for a quality product and cares about good customer service!

If you are looking for a resin to do a proper dip and bake on a transformer or coil, and don't want to buy it by the 5 gallon pail, Cactus Juice is your answer!  As far as I can tell, that's actually what this stuff is for in the industrial world...  You will need to set things up where you can either pull vacuum on your coil or let it soak in the resin for many hours (I went overnight).  Be aware that this will NOT turn it into a brick; it  IS going to glue everything that is close together into one piece, but large cavities will drain out.  It will take a LONG time to get your whole transformer or coil hot enough to set the resin; you MUST measure the temperature of the iron!  It took more than an hour to get to temperature on mine.  The adhesive used on Kapton tape softens when exposed to Cactus Juice and ends up slippery rather than solid or grippy.  This isn't an issue for things taped internally, but you may notice it on the end turns.  Fiberglass tape shouldn't have this issue, as the Cactus Juice can penetrate the tape itself.  I didn't test this, so YMMV!

I used it on my Magnabend build; self bonding wire is VERY difficult to get.  Regular magnet wire is easy to get...  With this resin, you can do a proper job with plain magnet wire.  The biggest drawback is that you must use the actual steel components when you bake it to ensure that the coil is where you need it to be; you won't end up with a free standing coil.  TEC Bond 7718 Polyamide Glue Stick (gluegun.com) is a good choice for attaching the insulation for the end turns after baking; it melts well above boiling water temperatures, unlike every other "hot only" hot glue I tried.  Epoxy works too, but you end up having to do it in many batches with lots of waiting on glue to set.  I think it was 9 batches over two days vs about 20 minutes (I did one end each way).

Many thanks to Alan for sharing his design and know-how!  http://www.aaybee.com.au/Magnabend/How_to_Build_a_Magnabend.html 

My order was processed quickly and accurately. It was well packaged and arrived in great condition. 

 

Do yourself a huge favor and use the products offered here. I use nothing but cactus juice vaccum chambers and cactus juice resin. Primarily I stabilize wood, antler, and bone with and without dye's for our custom knife business. It has taken the knives to a whole new level. The uses are endless and you will be surprised what it can do for you. Don't second guess yourself, you wont be let down!

Some companies have great products and feel like they don’t need customer service. Kind of a you need me attitude. 
Curtis and everyone on his team go over the top with the absolute best customer service.   Industry leaders in quality 

attention to details

quick turnaround on orders

support, support, support 

Thank you sir

I've always been pleased with my Turn-Tex transactions. Shipping is always prompt, questions are answered in a timely and concise manner, and their product are very good! Keith Nix Knives Black Mountain, NC

I have been purchasing Cactus Juice and Alumilite from Curtis's Turntex for over two years. The order fulfillment has always been prompt and accurate. Lately the shipments have been delivered at an even faster pace. These guys believe in taking care of their customers. 

Great product...Great Service !

Reggie Everett

Always great customer service from owner and team.

Had some cedar pieces from another project and wanted to turn them but they would just chip apart... Used this awesome cactus juice (entire family is curious why it's called cactus juice btw... Anyone know the reason?) and made the blanks nice and solid!!! Now they turn easily and don't chip! Easy to use, very straightforward, would highly recommend!! I have some walnut i want to use it on next!!

My husband and I have been making knives since he lost his job at the beginning of 2020 and I stay home with our special needs daughter. It was very hard to bring an income into the house,while keeping our daughter safe,and buying materials. But y'all make it affordable enough to be able to feed my family and keep the lights on. For that I am grateful. Because we know with the materials you sell, you could easily raise the price and people like us would have no choice but to buy it to complete our own orders. Y'all even gave us a Covid discount at the beginning of the pandemic. You seriously don't understand how much of an impact that had on us in the best way. It is still a struggle to pay bills, but y'all make it a little easier for families like ours. Thank yall. 

I want to thank Curtis and staff for great service on my recent order. I'll be returning to Turntex the next time I need Cactus juice.

I have ordered several times and the results are always awesome! Fast shipping and great price! The only place I will buy Cactus Juice on the web.

Orders always arrive quickly and hassle-free!

I have been buying Cactus Juice from Curtis for several years now.  Her has been an amazing source of info and support and always ships quickly.  Thanks Curtis!

I have never stabilized anything but while turning a piece of spalted maple discovered that's what it needed. I read the TurnTex site, bought a vacuum chamber and pump, then followed the directions and not much longer later finished a spalted maple bowl. It finished wonderfully and gets lots of compliments. I can't recommend Cactus Juice highly enough.

 

I have ordered several hundreds of dollars worth of Cactus Juice from TurnTex this past year and my experience has been the same every time; great product, great price, and great service. I am particularly impressed with management's desire to be of real service to their customers which is all too rare in today's world. To sum up my experience, "I Couldn't Be Happier".

Thank you TurnTex

I have purchased several items from Curtis - vacuum chamber and lots of cactus juice and am totally satisfied.

The vacuum chambers he builds are really great!  High quality, very user friendly and easy to clean.

He has great instructions with his products and is happy to answer any other questions you may have.

My products have always shipped quickly and arrived in great condition.

Quick shipping, and a top notch product!