Alumilite Amazing Deep Pour Epoxy
Alumilite Amazing Deep Pour Epoxy is sold by total mixed volume
Sizes
Check Shipping Cost
Enter your destination to get a shipping estimate.
Amazing Deep Pour is a 2-part, extremely clear, deep-cast epoxy. It is ideal for applications requiring thicker pours (up to 2 inches thick) or a glass-like finish.
This 2:1 mix ratio product was formulated to reduce exotherm (heat build-up), allowing users to pour thicker sections without the delays of layering as with standard epoxies. Amazing Deep Pour is compatible with Alumilite Dyes, mica powders, glow powders, and pigments.
Amazing Deep Pour is ideal for river tables, resin blanks for lathe turning, filling wide gaps in wood, or any application requiring a depth greater than 3/8 inch. ADP can also be layered for projects requiring thicknesses beyond 2 inches.
- 2:1 (2 parts A to 1 part B) by volume
- Low exotherm
- Low viscosity for easy mixing
- Long open time to allow for air bubble release
- 24-72 hour tack-free time (mass and temperature are factors)
- 5-7 day full cure
- Compliant with FDA 21 CFR 175.300
Units in box: $48.99-$181.99
Technical Specifications
Product:Amazing Deep Pour
Color:Clear
Mix Ratio:2A:1B by volume
Open Time:60-90 minutes
Demold Time:24-72 hours
Full Cure:5-7 days
Mixed Viscosity (cps):450
Specific Gravity:1.05
Shore Hardness (ASTM D2240):77-80 D
Izod Impact (ASTM D-256, lb/in):50
Tensile Strength (ASTM D-638, psi):7,500
Elongation (in./in.):5-6%
Heat Resistance:400+ ºF
Heat Deflection Temperature:108 ºF
FDA Compliant:Yes
Casting Dyes, Micas, Pigments, Glitters, and Glows