Alumilite Clear 16 lb Kit-Yellowed

You save:
Alumilite Clear 16 Pound Kit--Yellowed
 Back to: Bargin Bin--Seconds, Damaged, AS IS

Check Shipping Cost

Enter your destination to get a shipping estimate.

Shipping estimate for destination:

, ,


THE A SIDE OF THIS KIT IS QUITE YELLOWED.  It will not affect the cure of the product but will likely affect any clear casting.  Recommended only for dye and or mica casting.  Regular price is$193+, discounted to $140.  All Sales final, no returns, no exchanges.

Alumilite is sold by weight,  This kit includes 8 pounds each of A and B, approximately 2 gallons of mixed resin

Alumilite Clear is a premium clear casting resin preferred by professional blank makers around the world!  This resin was specially formulated with the woodworker's needs in mind including:

  • Resilience (less brittle than other resin types frequently used) so that your finished pieces don't crack if accidentally dropped
  • High polishability to achieve that high gloss many demand
  • High machinability which make your finished blanks easy to turn on a lathe, cut, route, or shape on a belt sander
  • Low shrinkage which makes Alumilite Clear the preferred resin for Worthless Wood** (wood and resin) castings
  • Optical clarity for those times you need a clear casting which also means your dyed castings will remain true to color
  • Very low odor so that your entire shop does not stink like when using other resins!

Alumilite Clear has a 7min open time and pressure casting is recommended to achieve bubble free results.

Alumilite Clear must be mixed 1:1 by weight NOT VOLUME. Off ratio mixing may produce hazy or frosted parts.

Recommended for industrial use only. B side may thicken and need to be warmed before use.

**This is the casting resin I originally discovered when looking for a better solution when developing the "worthless wood" casting technique (wood and resin hybrid) as well as for casting other embedded items such as pine cones, banksia pods, cactus, etc.  This is what I personally use for all of my blank casting.

Product   Alumilite Clear
Color   Clear
Mix Ratio   1:1 by WEIGHT
Pot Life   7 minutes
Demold Time (100 gr. Mass)   45-60 minutes
Mixed Viscosity (cps.)   450
Specific Gravity   1.04
Shore Hardness (ASTM D-2240)   78-80D
Shrinkage (in./in.)   .005
Tensile Strength (ASTM D-638) (psi)   4,200
Elongation (in./in.)   10-15%
Temperature Resistance   140 F